Custom Entryway Table completed and delivered today!

This entryway table is made from fir with a solid oak top and solid oak bottom shelf. The frame received 2 coats of General Finish driftwood, 1 top coat and then a single coat of@snow white. It was then lightly hand sanded to bring out the driftwood color below. The solid oak top and shelving was distressed using heavy chain, screws, hammer, Alan keys and pretty much anything I could find in the shop! Once distressed it was final sanded and received a single coat of briarsmoke stain. After everything was dry it was one last sanding with 800 grit and then a final top coat. 😀

Leave a comment

Name .
Message .

Please note, comments must be approved before they are published